You do not have permission to edit this page, for the following reasons:
Documentation-based security assessment: QNAP TS-230. Reviewed 2026-10-25. Documentation-based assessment of a defined QTS 5.2.10.3568 build 20260722 local-NAS configuration, not a factory-default or physical-test report. It uses native local users, password-only login, LAN HTTP management and an NFS AUTH_SYS share. Compatible internal SATA SSDs, with required mounting adapters, contain an unencrypted static user-data volume and an unencrypted shared folder; SED locking is not enabled. HTTP(S) IP access protection is enabled with configured failed-login and time limits. QuLog Center access logging is enabled for HTTP(S), with a destination on an unencrypted volume retaining more than 10 percent free space. The local password policy requires at least 12 characters, upper- and lower-case letters and digits, and newly created local users must change their temporary password at first logon. The documented physical basic-reset function is retained. These settings define the assessment case; no device was installed or tested. Ratings map documented capabilities and the stated configuration to WikiIoT choices. Rare is a qualitative assessment of documented bounded exposure/history, not a measured frequency. Prior attacks is explicitly platform-level history; the sources do not identify each selected model as a confirmed victim, and some campaigns predate individual model releases. An enabled plaintext path is rated No encryption. Storage covers user data on internal SATA SSD flash, without inferring the state of every boot component. Optional capabilities are not treated as enabled unless the assessment configuration states so. Historical CVEs do not imply that the selected patched firmware remains vulnerable. Release date: 2020-05-18; the date stated in the cited regional QNAP announcement. It is not asserted as the earliest worldwide sale date or a separately verified first-sale date for every RAM SKU. Historical vulnerability examples: CVE-2022-27596. Affected scope: QTS 5.0.1 before 5.0.1.2234 build 20221201. The model is listed for historical QTS 5.0.1.2194. Fix and assessment scope: QTS 5.0.1.2234 build 20221201 and later fix the issue. The selected QTS 5.2.10.3568 profile is not claimed to retain this vulnerability. No physical device was tested. These are documented configuration choices and qualitative rating judgments. Preserve this scope and the comments with the selected values. References: [https://www.qnap.com/en-me/news/2020/qnap-launches-stylish-budget-friendly-ts-230-nas-for-home-media-hub-and-file-center launch TS230 — official manufacturer source] [https://www.qnap.com/en/product/ts-230/specs/hardware spec TS-230 — official manufacturer source] [https://www.qnap.com/en/release-notes/qts/5.2.10.3568/20260722 QTS 5.2.10.3568 release notes and applicable models (2026-07-23)] [https://docs.qnap.com/operating-system/qts/5.2.x/en-us/basic-system-reset-797415BA.html QTS 5.2 physical basic reset and administrator recovery] [https://www.qnap.com/en/security-advisory/qsa-23-01 QNAP QSA-23-01: CVE-2022-27596 and fixed versions] [https://www.qnap.com/en/release-notes/qts/5.0.1.2194/20221022 QTS 5.0.1.2194 release notes and applicable models (historical affected version)] [https://www.qnap.com/en-us/security-advisory/qsa-22-24 QNAP QSA-22-24: September 2022 DeadBolt / Photo Station campaign] [https://www.qnap.com/en-us/security-advisory/qsa-22-02 QNAP QSA-22-02: January 2022 DeadBolt campaign] [https://www.qnap.com/en-au/release-notes/qts/5.2.8.3350/20251216 QTS 5.2.8.3350 release notes and applicable models] [https://docs.qnap.com/operating-system/qts/5.2.x/en-us/configuring-nfs-service-settings-4A850D3A.html QTS 5.2 NFS AUTH_SYS and Kerberos security] [https://docs.qnap.com/operating-system/qts/5.2.x/en-us/configuring-system-administration-settings-F6C72493.html QTS 5.2 HTTP / HTTPS administration settings] [https://docs.qnap.com/operating-system/qts/5.2.x/en-us/creating-a-static-volume-CF6B5E4A.html QTS 5.2 volume creation and optional AES-256 encryption] [https://docs.qnap.com/operating-system/qts/5.2.x/en-us/creating-a-local-user-A3835C8C.html QTS 5.2 local users and required first-login password change] [https://docs.qnap.com/operating-system/qts/5.2.x/en-us/deleting-users-926E2A50.html QTS 5.2 delete users] [https://docs.qnap.com/operating-system/qts/5.2.x/en-us/password-management-CFF9F245.html QTS 5.2 password changes and account recovery] [https://docs.qnap.com/operating-system/qts/5.2.x/en-us/configuring-ip-access-protection-18286EFA.html QTS 5.2 IP access protection / failed-login blocking] [https://docs.qnap.com/operating-system/qts/5.2.x/en-us/local-access-logs-8761937.html QTS 5.2 QuLog Center local access logs] [https://docs.qnap.com/operating-system/qts/5.2.x/en-us/configuring-access-log-settings-189F8A00.html QTS 5.2 access logging: destination and connection-type settings] [https://docs.qnap.com/operating-system/qts/5.2.x/en-us/configuring-the-password-policy-BDEDEB1D.html QTS 5.2 password policy]
For new submissions, pages will appear blank until approval.
Summary: This is a minor edit Watch this page
Save page Show preview Show changes Cancel
